Stainless Steel Ratchet Lubrication

Technical Bulletin: Stainless Steel Ratchet Lubrication

The EZ-Release ratchets in our cover are meant to be ratcheted very tight allowing the cover to perform at its best during towing or storage for shedding water. These ratchets are supplied without any lubrication and we’ve noticed that at times they can be difficult to tension or release.

We recommend an anti-seize type lubricant be applied in the barrel as indicated in the picture below. An aluminum or nickel based lubricant is suggested, as a copper based lubricant could dry out. The preferred anti-seize product used by your dealership should be adequate. Some anti-seize products may stain or discolor the vinyl. Do not over lubricate and be sure to close ratchet pocket door prior to folding.

Once applied ratchet them for 10 or so full pulls to spread the lubricant around. If you have continued problems please contact our warranty department using the contact form at commercialsewing.com/contact or call 860-482-5509 Ext 137.

Download PDF